- Abrasives and blades
- Zip Wheels
- Magnetic Drills
- Metal Cutting Saws
- Pillar Drills, Bench grinders
- Sandblasting
- Multi Function Machines
- Planer Thicknessers
- Dust Collectors
- Sliding compound mitre saws
- Bandsaws
- Table Saws
- Cordless Nail Guns
- Brad Nailers
- Headless Pinner
- Finish Nailers
- Framing Nailers
- Staplers
- Nails and Fastenings
PARWELD XTi161DV (110/230v) Arc/Tig Inverter The Welding Centre
PARWELD XTI161DV INVERTER WELDING MACHINE for MMA (stick) and LIFT ARC TIG
This DC output Inverter welding power source is lightweight and highly portable and with its ability to accept a mains input voltage of either 240V or 110V is the ultimate machine for the general workshop or on-site user. It can also be powered from a general mains electrical supply or from a suitable power generator.
Suitable for Manual Metal Arc (MMA) welding with various electrodes up to 4mm diameter, and also for TIG welding of mild and stainless steels and alloys. See drop down list for consumables and optional Tig facility
Its robust outer casing with shock proof and heat resistant front and rear panels and incorporated large size twist to lock cable connectors allow it to withstand the harshest of environments and usage. Especially with the outstanding operating duty cycle, 155A @ 60%, allowing for extended operation with large diameter electrodes and continuous use with 3.2 mm electrodes.
With automatic built-in functions for Arc Force, Hot Start and Anti Sticking making this machine easy for the novice to use but also a winner for the professional too.
The machine is also specially designed to be suitable for use additionally as a TIG welder with the added function of Lift Arc TIG selection, switched on the front panel, this allows for lowering the output voltage while arc striking and therefore saving damage to the Tungsten electrode and reducing weld-start contamination. A TIG welding torch is available as an optional accessory.
A strong, durable case for storage and carrying is supplied to hold the machine and all included accessories :- Electrode holder and lead, Earth lead and clamp machine shoulder strap and Chipping hammer/wire brush.
- Dual Voltage Input 110V or 240V with Automatic Smart Sensing
- 5 to 155 Amps and 155 A @ 60% Duty Cycle
- Lightweight – only 7.2 KG
- Dimensions – 330(L) x 140(W) x 250(H) mm
- Generator friendly, Recommended 6 KVA minimum
- Arc force for easy electrode striking
- Hot start for easy electrode re-striking
- Built in electrode anti sticking
- Supplied complete with GOOD QUALITY Electrode holder and Earth clamp with 3M cables
- Large welding cable plug connections
- Automatic Over Voltage and Over Current protection
- Lift Arc TIG mode switch
- Conforms to Insulation Class IP23 and CE regulations
- 12 months Return to base warranty
Supplied in strong storage and carrying case
If you require further technical advice or assistance, or if you prefer to collect from the shop, please phone 020 8399 2449. Open 9am - 5pm
|
|
These reviews have been submitted by our customers, if you have purchased this product - why not Write a Review. No reviews as yet...